Arcam Movie 2.1 « Audio Video Pood »

Audiovideopood.ee

E-pood

Arcam

DVD resiiverid

Arcam Solo DVD resiiver

Kirjeldus:

Pre-amplifier

Inputs

Maximum input level 2.5Vrms

Input impedance 47k

Signal/noise ratio 105dB

Line level outputs

Maximum output level 2.5Vrms

Output impedance 120

Optical output (TOSLINK)

Sample rate Up to 96kHz, depending on source

Amplifier

Continuous power output, per channel, 80kHz measurement bandwidth

Two channels, 8

Two channels, 4

Distortion, two channels, 4

power, 1kHz

0.011% THD+n

Ω, 1kHz 50Wrms, 0.02% THD+nΩ, 1kHz 64Wrms, 0.05% THD+nΩ, 80%

Video outputs

Composite video 1 x gold plated phono. 1V pk-pk in 75

Component video Interlaced or Progressive

3 gold plated phono sockets.

Y 1V pk-pk in 75

0.7V pk-pk in 75

Ω, Pb 0.7V pk-pk in 75Ω, PrΩ

SCART socket with

RGB video (where

fitted)

All 0.7V in 75

stereo audio

Auto switching of TV with aspect ratio control

HDMI 19-pin HDMI connector

Supported video formats are:

720 x 576p, 720 x 480p, 1280 x 720p,

1920 x 1080i, 1366 x 768p

audio to 2-channel/96kHz (24-bit).

Ω, composite video 1V in 75Ω, and

CD/DVD-A/SACD playback

Digital-Analogue Conversion CS42528 24-bit/192kHz DAC

differential output

Frequency response (±0.5dB) 20Hz–20kHz

DAB receiver (where fitted)

DAC AKM 96kHz 24-bit Delta-Sigma

DAC

RF tuning range 174–240MHz (Band III)

1452–1490MHz (L-band)

Sensitivity (typical) –98dBm (VHF measurement to

EN50248)

Input impedance 50

Audio data rate (maximum) 256kbits/s MPEG layer II, protection

level 3

Number stored services (maximum) 128

FM receiver

RF tuning range 87.5–108MHz

Sensitivity (typical) 2μV

Signal/noise ratio (at 200mV) 58dB

Distortion (THD at 200mV) 0.5%

AM receiver (where fitted)

RF tuning range 522–1611kHz

Signal/noise ratio (at 200mV) 40dB

Solo Movie 2.1 plays a wide range of disc types, which

include:

DVD-Video (single region, set at factory)

DVD-Audio

SACD version 1.3

MPEG2-encoded video files

and MP4-Nero formatting

MPEG4-encoded (DivX) video files (in AVI, MP4,

decoding, CD-R, and CD-RW

CDDA (‘normal’ audio-CDs) including HDCD

Video CD, and SVCD

restrictions apply)

MP2, MP3, WMA, and OGG audio files (some

Other disc formats may not play correctly in this player.

DVD-R/RW and CD-R/RW discs (Audio CDs and Video

CD/Super VCDs) recorded using a DVD recorder, CD

recorder or personal computer are not guaranteed to

play in the Solo Movie 2.1. Incompatibility may be due to

a number of possibilities, including the type of disc used

and the recording method.

JPEG image files on CD (Picture CDs) and DVD.
CD-

R/RW and DVD-R/RW compatibility

<

recorded in CD Audio or Video CD/Super VCD

format, or as a CD-ROM containing the audio

and video file types listed above. Other content

may cause the disc not to play, or to create noise/

distortion in the output.
This unit will play CD-R and CD-RW discs
<

recorded using the DVD Video format, or as a

DVD-ROM containing the audio and video file

types listed above.
This unit will play DVD-R/RW discs that are
<
This unit cannot be used for recording discs.
<

session discs,

but plays only sessions that are closed. Unfinalised

discs cannot be played.
This player is compatible with multi-
<

special characters (.+/=).
File names must not contain blank spaces or
<

ISO 9660 Level 1 or Level 2 compliant.

CD physical format: Mode1, Mode2 XA Form 1, or

Mode2 Form 2.

File names up to 15 characters are supported.
A CD-ROM used to compile your files must be
<

ISO 9660 Level 1 or Level 2 compliant.
A DVD-ROM used to compile your files must be
<

directories. Each directory may contain up to 220

files.
Each disc (CD or DVD) may contain up to 1500
Compressed audio compatibility

The Solo Movie 2.1 will play CD- or DVD-ROM discs

containing files saved in the MPEG1

Audio Layer 2

(MP2), MPEG1

Audio Layer 3 (MP3), Windows Media

file (WMA) and OGG formats, with sampling rates of

44.1 or 48kHz. Incompatible files will not play correctly,

potentially causing noise or distortion on the audio

outputs.

<

files are recommended. Variable bit-

rate (VBR) files are playable, but the playing time

may not be shown correctly.
Fixed bit-rate
<

with the file extensions ‘.mp3’, ‘.wma’, ‘.mp2’ and

‘.ogg’ (names are not case-sensitive).
This player recognises only tracks that are named
<

available to encode your audio files. Those

supported by this player are:
There are many different recording bit-rates
For MP2, MP3 and

OGG playback

The following constant bit rates are

supported: 32, 64, 80, 96, 112, 128, 160, 192,

256 and 320 kilobits per second. Variable bit

rate (VBR) between 96kb/s and 320kb/s is

also supported.

For WMA

playback

The following constant bit rates are

supported: 48, 64, 80, 96, 128, 160 and

192kb/s.

Note that MP3 audio encoded at 128 kbps or higher

should sound close to regular CD Audio quality. This

player will play lower bit-

rate MP3 or WMA tracks

kodulehe valmistamine

Arcam Solo DVD resiiver Movie 2.1